Most industrial CO₂ can be avoided by replacing fossil fuels. Cement is different. A large share of its emissions is released by the raw material itself, whatever fuel fires the kiln. An article by SPIN member novoMOF AG in the October 2026 issue of International Cement Review sets out why this makes CO₂ capture unavoidable for the sector, and why the next challenge is retrofitting the plants that already exist. For Power-to-X, the topic matters for a second reason: cement is one of the most durable industrial sources of CO₂ that synthetic fuels and chemicals could recycle.

Why fuel switching is not enough

Cement production starts with the calcination of limestone: calcium carbonate is heated to around 900°C and splits into lime and CO₂. According to the article, roughly 60 per cent of a cement plant’s direct CO₂ emissions come from this chemical reaction, not from burning fuel. Producing one tonne of cement typically releases 0.6 to 0.8 tonnes of CO₂. Efficiency gains, alternative fuels and clinker substitution all help, but they cannot remove the process emissions. The authors cite the net-zero road map of the Global Cement and Concrete Association, in which carbon capture, utilisation and storage is the largest single lever, contributing around 36 per cent of the planned reductions by 2050.

Brevik: the proof point

In June 2025, Heidelberg Materials inaugurated the capture facility at its Brevik cement plant in Norway, the first industrial-scale installation of its kind in the cement industry. It is designed for around 400,000 tonnes of CO₂ a year, about half of the plant’s emissions. The CO₂ is liquefied and shipped to the Northern Lights storage site under the North Sea. According to the Global CCS Institute’s facility profile, the plant uses an amine-based solvent process and was retrofitted to an operating cement works.

Brevik was built with substantial support from the Norwegian state. Its value, the article argues, is as a blueprint: it proves the chain from kiln to storage site. The task now is to develop the next projects with leaner capture technology, lower energy demand and a smaller footprint.

What a retrofit has to deliver

Cement plants are spread across many regions, close to quarries and construction markets, and most plants that will emit in 2040 already exist today. Capture therefore has to be added downstream of the kiln, without interfering with clinker production, in modular steps and without long production stops. Conventional amine scrubbing brings large absorption columns, solvent handling and a substantial heat requirement.

This is where the authors see an opening for solid adsorbents such as metal-organic frameworks (MOFs). Cement kiln flue gas typically contains around 15 to 30 per cent CO₂ by volume, and many plants have low-grade waste heat that may be usable for regeneration. A caveat is in order: the article is written by a company that develops such materials, and it describes MOF-based capture as maturing through pilot projects, not as proven at Brevik scale.

Regulation turns emissions into costs

Under the EU Emissions Trading System, free allowances for sectors covered by the Carbon Border Adjustment Mechanism, cement among them, are being phased out between 2026 and 2034. Step by step, this exposes European cement production to the full carbon price.

What this means for Power-to-X

Power-to-X needs carbon as well as renewable energy. That carbon can come from three sources: biogenic, atmospheric and industrial. Cement’s process emissions belong to the third group, and they will remain available for as long as limestone is calcined. Recycled CO₂ from a cement kiln can replace fossil carbon in fuels and chemicals, provided that the recycling displaces fossil carbon and does not become a reason to burn more of it. Whether a given tonne is stored or recycled will depend on location, infrastructure and demand. In both cases it has to be captured first, at an energy cost and footprint that an existing plant can carry.

Source: novoMOF AG, «Decarbonizing the Cement Industry», first published in International Cement Review, October 2026, as «Advanced adsorbents for carbon capture retrofits». novoMOF AG is a member of SPIN.

🤖 AI transparency: This text and its visual were created using AI, reviewed and approved by a human.

Join us now — button linking to SPIN membership application

Members gain direct access to Switzerland’s cross-sector Power-to-X network of research institutes, industry leaders and policymakers — and a seat at the table shaping the country’s innovation, regulatory and technological path to defossilization.

← Back

Thank you for your response. ✨

I would like to join SPIN as
Is the organisation already a member of Swissmem?